Resources Publications Design Guidelines Design Briefs Case Studies Technology Overviews Publication Library Software & Tools eQUEST® eVALUator SkyCalc™ Commissioning Assistant Instructions Resources Launch Application SPOT™ Green Building Studio EDR Charrette CoolTools™ CoolTools Pipe Size Optimization Tool CoolTools Chiller Bid and Performance Tool Email Newsletters e-News Manage Subscriptions External Links Associations and Organizations California Federal Research and Programs Regulations, Codes and Specifications Commissioning Resources Control Systems Motors General Research General Resources Other Lists of Energy Links Publications Schools

Technology Overviews These overviews will guide you to a better understanding of energy-efficiency measures and technologies. Reading them will help you understand how they work, how they save energy and whether or not they may be appropriate to include in your building design or retrofit.   Current Articles Technology Overview: Cool Roofs published Monday, August 27, 2007   3968 Views :: 0 Comments Cool roofs have a combination of reflectance and emittance properties that keep them cool on hot days. They reduce the cooling loads of buildings, especially during peak times. How it works Almost any roof can be a cool roof. They usually require no special design work or components and can be made from many different materials, including: Light-colored aggregate Applied liquid coatings Shingles, slate, or tile Single-ply membranes, or Vegetation. How it saves energy Cool roofs reduce the load on a building’s air conditioning system by reducing the amount of heat conducted into the building from the roof. They are especially effective at reducing peak electricity demand. Cool roofs have a combination of high solar reflectance and high solar emittance. High reflectance means that less infra-red heat is absorbed by the roof, and high emittance means that once the roof has heated up, it re-radiates solar heat back out to the sky more quickly. Cool roofs that use vegetation also increase the thermal mass of the building and reduce water run-off. Design considerations Most definitions of “cool roofs” include only their reflectance and emittance properties. It’s important to remember, however, that the thermal performance of a roof depends on many factors including roof geometry, substrates, underlayments, thermal breaks, ventilation, and insulation. Even cool roofs benefit from high levels of insulation. Although most cool roofs are white, some darker colored roofs can also be “cool.” This is because visible light makes up less than half the sun’s energy, and these darker roofs reflect more infra-red light. To remain effective, cool roofs must maintain their high solar reflectance. Fungal growth and the build-up of dust are the main causes of degradation and should be counteracted with regular cleaning. The cost-effective frequency of cleaning will depend on the roof material, the pitch of the roof, and the location of the building. In cooler climates, the high emittance of cool roofs can sometimes be an energy penalty because it increases winter heat loss. So make sure that the emittance of the roof is optimized for the building’s climate. Rate this Article   12345 Comments Currently, there are no comments. Be the first to post one! You must be logged in to post a comment. You can login here Follow EDR on   Print   Email   MyEDR   Digg This   del.ico.us   Slashdot   Newsvine   Reddit